Manual Key Start DSE501K Generator Controller Electronics Modul fits Deep Sea

Description

Product Name: Manual Key Start DSE501K Generator Controller Electronics Modul fits Deep Sea

Replace Part Number: DSE501K

Specifications:
The model 501K is a Manual Engine Control Module, which is designed to manually control the engine via a key
switch on the front panel. The module is used to start and stop engine, indicating fault conditions, automatically s
hutting down engine and indicating engine failure by LED giving true first up fault annunciation.
Product Features:
Oil Pressure Monitoring
Engine Temperature Monitoring
Overspeed Protection
Charge Failure Warning
DC Supply: 9 to 33 V Continuous.
Cranking Dropouts: Able to survive voltage dips during cranking. This is achieved without the need
for internal batteries.
Alternator Input Range: 15 – 305 V AC RMS
Alternator Input Frequency: 50 – 60 Hz at rated engine speed.
Magnetic Input Range: 0. 5 V to +/- 80 V
Magnetic Input Frequency: 2300Hz to 6000 Hz at rated engine speed.
Start Relay Output: 16 Amp DC at supply voltage.
Run Relay Output: 16 Amp DC at supply voltage.
Alarm Output: 1 Amp DC at supply voltage.
Measurements: 72 X 72 X 118. 5 (Excluding Key-switch)
Operating Temperature Range: -30 to +70°C
Installation:
Front panel mounting via suitable cut-out.
Retaining clips supplied.
Cable connections via locking plug and socket type connectors.
Calibration: Speed trip setting and meter calibration adjustment potentiometer are accessible
from the rear of the module